Shop Software - Bend-Tech https://www.bend-tech.com/shop-software/ Bend-Tech is the leader in the tube and pipe bending software and plasma tube and pipe cutting CNC machines since 2001 Fri, 30 May 2025 20:22:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.3 https://www.bend-tech.com/wp-content/uploads/2025/07/cropped-Stacked-Logo-32x32.png Shop Software - Bend-Tech https://www.bend-tech.com/shop-software/ 32 32 Bend-Tech SE – Upgrade (Release 7.x) https://www.bend-tech.com/product/bend-tech-se-upgrade-7-x/ Fri, 13 May 2022 15:54:10 +0000 https://test.bend-tech.com/?post_type=product&p=6039
  • Check to verify sufficient material is available for the bending process.
  • Provide a "spring back" bend angles.
  • Provide extra checking tools to verify part validity.
  • Allows for multiple dies to be used on the same part.
  • Additional functionality for roll bending.
  • Provides a graphical layout interface.

    • The post Bend-Tech SE – Upgrade (Release 7.x) appeared first on Bend-Tech.

    ]]>     Bend-Tech SE – Upgrade (Release 7.x)

    Our standard edition commercial software for tube and pipe design/manufacturing. If tube bending is part of your company’s business or you are serious about tube bending, then Bend-Tech SE is where you want to start.

    Of course, SE provides the ease of use found with EZ, the fundamental 3D engineering of EZ3D and the assembly design of PRO. SE provides those extra tools that you will need when you are concerned about setup and production times. What separates SE from the rest is its focus on manufacturability and flexibility in design.

    Focus on Manufacturability:

    • SE checks to verify sufficient material is available for the bending process.
    • SE can provide “spring back” bend angles.
    • SE provides extra checking tools to verify part validity.
    • SE allows for multiple dies to be used on the same part.
    • SE has extra functionality for roll bending.
    • SE provides a graphical layout interface.

     

    Focus on Design Flexibility:

    • SE has an XYZ interface.
    • SE has an advanced LRA “Length, Rotation & Angle” design interface.
    • SE has a very powerful reverse engineering feature.
    • SE allows for dxf/step/iges/ interfacing (with the Import/Export module).
    • SE allows for unit conversion (inches vs millimeters).

     

    Like our other products, SE has the same state-of-the-art interface. When the software is first viewed you will find multiple document windows interface with a new document ready to be used. SE offers the multiple listing of predefined templates, custom parts, the custom 3D Part interface and the assembly interface like PRO, however, you will also find a XYZ interface. The Import/Export module will also allow .step, .iges, and .dxf files to be imported into the software.

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

    The post Bend-Tech SE – Upgrade (Release 7.x) appeared first on Bend-Tech.

    ]]>     6039     Bend-Tech SE Software – Triple Bundle https://www.bend-tech.com/product/bend-tech-se-software-sheet-triple-bundle/ Wed, 20 Apr 2022 19:47:59 +0000 https://test.bend-tech.com/?post_type=product&p=5295 SE is Bend-Tech's full-feature software for tube and pipe design manufacturing that allows you to add additional modules as your needs grow.

    The post Bend-Tech SE Software – Triple Bundle appeared first on Bend-Tech.

    ]]>     Bend-Tech SE Software – Sheet Metal Bundle

    Master Collection includes:

    • Sheet Metal Designer
    • Sheet Metal Templates
    • Roll Cage Templates
    • Large Radius Designer

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

     

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10, 11). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 months, the software can run offline in between.)

     

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High-speed internet.

    The post Bend-Tech SE Software – Triple Bundle appeared first on Bend-Tech.

    ]]>     5295     Bend-Tech SE Software – Sheet Metal Bundle https://www.bend-tech.com/product/bend-tech-se-software-sheet-metal-bundle/ Wed, 20 Apr 2022 19:43:16 +0000 https://test.bend-tech.com/?post_type=product&p=5292 SE is Bend-Tech's full-feature software for tube and pipe design manufacturing that allows you to add additional modules as your needs grow.

    The post Bend-Tech SE Software – Sheet Metal Bundle appeared first on Bend-Tech.

    ]]>     Bend-Tech SE Software – Sheet Metal Bundle

    Master Collection includes:

    • Sheet Metal Designer
    • Sheet Metal Templates
    • Large Radius Designer

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10, 11). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 months, the software can run offline in between.)

     

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High-speed internet.

    The post Bend-Tech SE Software – Sheet Metal Bundle appeared first on Bend-Tech.

    ]]>     5292     Bend-Tech SE Software – Master Collection https://www.bend-tech.com/product/bend-tech-se-software-master-collection/ Wed, 20 Apr 2022 19:29:51 +0000 https://test.bend-tech.com/?post_type=product&p=5287 SE is Bend-Tech's full-feature software for tube and pipe design manufacturing that allows you to add additional modules as your needs grow.

    The post Bend-Tech SE Software – Master Collection appeared first on Bend-Tech.

    ]]>     Bend-Tech SE Software – Master Collection

    Master Collection includes:

    • Sheet Metal Designer
    • Sheet Metal Templates
    • Roll Cage Templates
    • Armor Pack Templates
    • Large Radius Designer
    • Header Designer
    • Exhaust Designer

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 month, software can run offline in between.)

     

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High speed internet.

    The post Bend-Tech SE Software – Master Collection appeared first on Bend-Tech.

    ]]>     5287     Bend-Tech SE Software + SOLIDWORKS Plug-In https://www.bend-tech.com/product/bend-tech-se-software-plus-sw/ Wed, 20 Apr 2022 19:21:08 +0000 https://test.bend-tech.com/?post_type=product&p=5279 SE is Bend-Tech's full-feature software for tube and pipe design manufacturing that allows you to add additional modules as your needs grow.

    The post Bend-Tech SE Software + SOLIDWORKS Plug-In appeared first on Bend-Tech.

    ]]>     Bend-Tech SE Software + SOLIDWORKS Plug-In
    • SOLIDWORKS Plug-In
    • Full 3D assembly design
    • Precise tube bending instruction including spring back.
    • Cutting profile instructions; fish-mouthing, notching, etc.
    • Allows for STEP/IGES/DXF import & export interface.
    • Checks to verify sufficient material is available for the bending process.
    • Provides extra checking tools to verify part validity.
    • Allows unit conversion between inches vs millimeters.
    • Offers XYZ interface.
    • Powerful reverse engineering feature.
    • Includes all features of Bend-Tech EZ, EZ3D, PRO, and more!

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

     

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 months, the software can run offline in between.)

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High-speed internet.

    The post Bend-Tech SE Software + SOLIDWORKS Plug-In appeared first on Bend-Tech.

    ]]>     5279     Bend-Tech PRO Software – Triple Bundle https://www.bend-tech.com/product/bend-tech-pro-software-triple-bundle/ Wed, 20 Apr 2022 18:36:27 +0000 https://test.bend-tech.com/?post_type=product&p=5271 Bend-Tech's Pro software will allow you to:

    • Full 3D assembly design
    • Precise tube bending instruction including springback.
    • Cutting profile instructions; fish-mouthing, notching, etc.
    • Includes all features of Bend-Tech EZ, EZ3D, and more!

    The post Bend-Tech PRO Software – Triple Bundle appeared first on Bend-Tech.

    ]]>     Bend-Tech PRO Software – Triple Bundle

    Modules included in the Triple Bundle Collection include:

    • Sheet Metal Designer
    • MSP Templates
    • Roll Cage Templates

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10,11). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 months, the software can run offline in between.)

     

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High-speed internet.

    The post Bend-Tech PRO Software – Triple Bundle appeared first on Bend-Tech.

    ]]>     5271     Bend-Tech PRO Software Sheet Metal Bundle https://www.bend-tech.com/product/bend-tech-pro-software-sheet-metal-bundle/ Wed, 20 Apr 2022 18:35:34 +0000 https://test.bend-tech.com/?post_type=product&p=5270 Bend-Tech's Pro software will allow you to:

    • Full 3D assembly design
    • Precise tube bending instruction including springback.
    • Cutting profile instructions; fish-mouthing, notching, etc.
    • Includes all features of Bend-Tech EZ, EZ3D, and more!

    The post Bend-Tech PRO Software Sheet Metal Bundle appeared first on Bend-Tech.

    ]]>     Bend-Tech PRO – Sheet Metal Bundle

    Modules included in the Sheet Metal Bundle  include:

    • Sheet Metal Designer
    • MSP Templates

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

     

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10, 11). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 months, the software can run offline in between.)

     

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High-speed internet.

    The post Bend-Tech PRO Software Sheet Metal Bundle appeared first on Bend-Tech.

    ]]>     5270     Bend-Tech PRO Software Master Collection – Bundled Pricing https://www.bend-tech.com/product/bend-tech-pro-software-master-collection-bundled-pricing/ Wed, 20 Apr 2022 18:05:05 +0000 https://test.bend-tech.com/?post_type=product&p=5264 Bend-Tech's Pro software will allow you to:

    • Full 3D assembly design
    • Precise tube bending instruction including springback.
    • Cutting profile instructions; fish-mouthing, notching, etc.
    • Includes all features of Bend-Tech EZ, EZ3D, and more!

    The post Bend-Tech PRO Software Master Collection – Bundled Pricing appeared first on Bend-Tech.

    ]]>     Bend-Tech PRO Software Master Collection

    Modules included in the Master Collection Bundle Collection include:

    • Sheet Metal Designer
    • MSP Templates
    • Roll Cage Templates
    • Armor Pack Template
    • Large Radius Designer
    • Header Designer
    • Exhaust Designer

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10, 11). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 months, the software can run offline in between.)

     

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High-speed internet.

    The post Bend-Tech PRO Software Master Collection – Bundled Pricing appeared first on Bend-Tech.

    ]]>     5264     Bend-Tech PRO Software https://www.bend-tech.com/product/bend-tech-pro-software/ Fri, 25 Feb 2022 16:41:03 +0000 http://54.80.99.118/?post_type=product&p=1761 Bend-Tech's Pro software will allow you to:

    • Full 3D assembly design
    • Precise tube bending instruction including springback.
    • Cutting profile instructions; fish-mouthing, notching, etc.
    • Includes all features of Bend-Tech EZ, EZ3D, and more!

    The post Bend-Tech PRO Software appeared first on Bend-Tech.

    ]]>     Bend-Tech PRO Software
    • Full 3D assembly design
    • Precise tube bending instruction including springback.
    • Cutting profile instructions; fish-mouthing, notching, etc.
    • Includes all features of Bend-Tech EZ, EZ3D, and more!

     

    After the Purchase:

    Confirmation Email

    You will receive a confirmation receipt email after a successful transaction.

    Download Link

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

    Computer Requirements:

    Minimum Requirements

    • Windows Operating System (XP, Vista, 7, 8, 8.1, 10, 11). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 2 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1024 x 768 screen resolution.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 installed.
    • Keyboard and mouse.
    • Active internet connection (Internet connection is needed during the first activation and then every 6 months, the software can run offline in between.)

     

    Recommended Requirements

    • Windows Operating System (7, 8, 8.1, 10). Bend-Tech software does NOT run on MAC.
    • 1 GHz processor.
    • 4 GB RAM (Memory).
    • 1 GB hard drive space.
    • 1280 x 800 screen resolution or greater.
    • OpenGL 1.3 compatible graphics card.
    • .NET framework 3.5 SP1 installed.
    • PDF reader installed (For help guides).
    • Full keyboard and mouse.
    • High-speed internet.

    The post Bend-Tech PRO Software appeared first on Bend-Tech.

    ]]>     1761     Bend-Tech EZ3D Software https://www.bend-tech.com/product/bend-tech-ez3d-software/ Fri, 25 Feb 2022 16:33:08 +0000 http://54.80.99.118/?post_type=product&p=1758 If you need a few single parts bent with rotation, EZ3D is a start. EZ3D is also useful if you won't be fabricating multiple tube assemblies such as roll cages, bumpers, etc.

    The post Bend-Tech EZ3D Software appeared first on Bend-Tech.

    ]]>     Bend-Tech EZ3D Software

    Bend-Tech EZ3D was designed to help out serious hobbyists. We took our easy-to-use EZ product and added a 3D interface. Our Tri-Star interface is unique in that a customer doesn’t need to learn XYZ, it uses terms like the front, back, floor, ceiling, left, and right. While you are stepping quickly around the part, EZ3D is calculating your bend angles and rotations. No more guessing.

    *EZ3D functions are also available in PRO and SE.

    EZ3D is also our introduction to Bend-Tech’s simulation.

    Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

    The post Bend-Tech EZ3D Software appeared first on Bend-Tech.

    ]]>     1758