Our standard edition commercial software for tube and pipe design/manufacturing. If tube bending is part of your company’s business or you are serious about tube bending, then Bend-Tech SE is where you want to start.

Of course, SE provides the ease of use found with EZ, the fundamental 3D engineering of EZ3D and the assembly design of PRO. SE provides those extra tools that you will need when you are concerned about setup and production times. What separates SE from the rest is its focus on manufacturability and flexibility in design.

Focus on Manufacturability:

• SE checks to verify sufficient material is available for the bending process.
• SE can provide “spring back” bend angles.
• SE provides extra checking tools to verify part validity.
• SE allows for multiple dies to be used on the same part.
• SE has extra functionality for roll bending.
• SE provides a graphical layout interface.

Focus on Design Flexibility:

• SE has an XYZ interface.
• SE has an advanced LRA “Length, Rotation & Angle” design interface.
• SE has a very powerful reverse engineering feature.
• SE allows for dxf/step/iges/ interfacing (with the Import/Export module).
• SE allows for unit conversion (inches vs millimeters).

Like our other products, SE has the same state-of-the-art interface. When the software is first viewed you will find multiple document windows interface with a new document ready to be used. SE offers the multiple listing of predefined templates, custom parts, the custom 3D Part interface and the assembly interface like PRO, however, you will also find a XYZ interface. The Import/Export module will also allow .step, .iges, and .dxf files to be imported into the software.

Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

The post Bend-Tech SE – Upgrade (Release 7.x) appeared first on Bend-Tech.

New 7x features:

• New Interface – Sketch 2D
• Improve Template interface
• Cleaner, easier-to-use interface
• Improved Custom Part interface
• Many new additional features.

Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

The post Bend-Tech EZ – Upgrade (Release 7.x) appeared first on Bend-Tech.

• New Interfaces – Sketch 2D/3D, Harpoon 3D
• Improve Template interface
• Add Rotation to Templates
• Cleaner, easier to use interface
• Improved single part interfaces
• Many new additional features.

Both CD and Download will be provided with this purchase. (Download link will be sent to your email within 2-5 hours on normal business hours.)

The post Bend-Tech EZ-3D 7x Upgrade appeared first on Bend-Tech.

The post Bend-Tech PRO – Upgrade (Release 7.x) appeared first on Bend-Tech.

Bend-Tech EZ3D was designed to help out serious hobbyists. We took our easy-to-use EZ product and added a 3D interface. Our Tri-Star interface is unique in that a customer doesn’t need to learn XYZ, it uses terms like front, back, floor, ceiling, left and right. While you are stepping quickly around the part, EZ3D is calculating your bend angles and rotations. No more guessing.

*EZ3D functions are also available in PRO and SE.

EZ3D is also our introduction to Bend-Tech’s simulation.

Both CD and Download will be provided with this purchase. (A download link will be sent to your email within 2-5 hours on normal business hours.)

The post Bend-Tech EZ3D (Upgrade from EZ) appeared first on Bend-Tech.

Bend-Tech PRO was introduced with our assembly interface which has taken the market by storm. At a modest price, everyone can design and fabricate tubing like the pros.

We spent countless hours observing and asking questions to our customers about how they would like to see PRO work. Our customers wanted the power but didn’t want the learning curve and frustration that comes with a standard CAD system. We peeled back the pillars of standard CAD thinking and put together an interface that is logical beyond belief. Most customers are comfortable with full assembly design in less than 2 hours. Again don’t let the learning curve fool you, customers are designing entire fabricated tube chassis the first night they sit down with the software.

The assembly interface consists of 3 primary functions.

• Full 3D assembly design
• Complete dimensioning
• Cutting instructions including fish-mouthing

At any time during the design in PRO’s assembly interface, you can look up the details of a part and print out entire manufacturing instructions. PRO uses your tooling and materials libraries so you are confident you can create what is being designed.

Bend-Tech PRO will allow your creativity to become reality. PRO has empowered the fabricator. PRO allows any fabricator to become proficient tubing manufacturer in a few short hours. If you are a serious hobbyist, start-up shop, or a small full-time fabricator, PRO will save you thousands of dollars in costly rework and material scrap.

Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

The post Bend-Tech PRO (Upgrade from EZ) appeared first on Bend-Tech.

Bend-Tech PRO was introduced with our assembly interface which has taken the market by storm. At a modest price, everyone can design and fabricate tubing like the pros.

We spent countless hours observing and asking questions to our customers about how they would like to see PRO work. Our customers wanted the power but didn’t want the learning curve and frustration that comes with a standard CAD system. We peeled back the pillars of standard CAD thinking and put together an interface that is logical beyond belief. Most customers are comfortable with full assembly design in less than 2 hours. Again don’t let the learning curve fool you, customers are designing entire fabricated tube chassis the first night they sit down with the software.

The assembly interface consists of 3 primary functions.

• Full 3D assembly design
• Complete dimensioning
• Cutting instructions including fish-mouthing

At any time during the design in PRO’s assembly interface, you can look up the details of a part and print out entire manufacturing instructions. PRO uses your tooling and materials libraries so you are confident you can create what is being designed.

Bend-Tech PRO will allow your creativity to become reality. PRO has empowered the fabricator. PRO allows any fabricator to become proficient in tubing manufacturing in a few short hours. If you are a serious hobbyist, start-up shop, or a small full-time fabricator, PRO will save you thousands of dollars in costly rework and material scrap.

Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

The post Bend-Tech PRO (Upgrade from EZ3D) appeared first on Bend-Tech.

Our standard edition commercial software for tube and pipe design/manufacturing. If tube bending is part of your company’s business or you are serious about tube bending, then Bend-Tech SE is where you want to start.

SE provides the ease of use found with EZ, the fundamental 3D engineering of EZ3D, and the assembly design of PRO. SE provides those extra tools that you will need when you are concerned about setup and production times. What separates SE from the rest is its focus on manufacturability and flexibility in design.

Focus on manufacturability:

• SE checks to verify sufficient material is available for the bending process.
• SE can provide “spring back” bend angles.
• SE provides extra checking tools to verify part validity.
• SE allows for multiple dies to be used on the same part.
• SE has extra functionality for roll bending.
• SE provides a graphical layout interface.

Focus on design flexibility:

• SE has an XYZ interface.
• SE has an advanced LRA “Length, Rotation & Angle” design interface.
• SE has a very powerful reverse engineering feature.
• SE allows for dxf/step/iges/ interfacing (with the Import/Export module).
• SE allows for unit conversion (inches vs. millimeters).

Like our other products, SE has the same state-of-the-art interface. When the software is first viewed you will find multiple document windows interface with a new document ready to be used. SE offers the multiple listing of predefined templates, Custom Part, the Custom 3D Part interface and the Assembly interface like PRO, however, you will also find an XYZ interface. The Import/Export module will also allow .step, .iges, and .dxf files to be imported into the software.

Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

The post Bend-Tech SE (Upgrade from EZ) appeared first on Bend-Tech.

You must own and have registered Bend-Tech EZ3D

Our standard edition commercial software for tube and pipe design/manufacturing. If tube bending is part of your company’s business or you are serious about tube bending, then Bend-Tech SE is where you want to start.

Of course, SE provides the ease of use found with EZ, the fundamental 3D engineering of EZ3D, and the assembly design of PRO. SE provides those extra tools that you will need when you are concerned about setup and production times. What separates SE from the rest is its focus on manufacturability and flexibility in design.

Focus on Manufacturability:

• SE checks to verify sufficient material is available for the bending process.
• SE can provide “spring back” bend angles.
• SE provides extra checking tools to verify part validity.
• SE allows for multiple dies to be used on the same part.
• SE has extra functionality for roll bending.
• SE provides a graphical layout interface.

Focus on Design Flexibility:

• SE has an XYZ interface.
• SE has an advanced LRA “Length, Rotation & Angle” design interface.
• SE has a very powerful reverse engineering feature.
• SE allows for dxf/step/iges/ interfacing (with the Import/Export module).
• SE allows for unit conversion (inches vs millimeters)

Like our other products, SE has the same state-of-the-art interface. When the software is first viewed you will find multiple document windows interface with a new document ready to be used. SE offers the multiple listing of predefined templates, Custom Part, the Custom 3D Part interface and the Assembly interface like PRO, however, you will also find an XYZ interface. The Import/Export module will also allow .step, .iges, and .dxf files to be imported into the software.

Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

The post Bend-Tech SE (Upgrade from EZ3D) appeared first on Bend-Tech.

Our standard edition commercial software for tube and pipe design/manufacturing. If tube bending is part of your company’s business or you are serious about tube bending, then Bend-Tech SE is where you want to start.

Of course, SE provides the ease of use found with EZ, the fundamental 3D engineering of EZ3D, and the assembly design of PRO. SE provides those extra tools that you will need when you are concerned about setup and production times. What separates SE from the rest is its focus on manufacturability and flexibility in design.

Focus on Manufacturability:

• SE checks to verify sufficient material is available for the bending process.
• SE can provide “spring back” bend angles.
• SE provides extra checking tools to verify part validity.
• SE allows for multiple dies to be used on the same part.
• SE has extra functionality for roll bending.
• SE provides a graphical layout interface.

Focus on Design Flexibility:

• SE has an XYZ interface.
• SE has an advanced LRA “Length, Rotation & Angle” design interface.
• SE has a very powerful reverse engineering feature.
• SE allows for dxf/step/iges/ interfacing (with the Import/Export module).
• SE allows for unit conversion (inches vs millimeters).

Like our other product, SE has the same state-of-the-art interface. When the software is first viewed you will find multiple document windows interface with a new document ready to be used. SE offers the multiple listing of predefined templates, Custom Part, the Custom 3D Part interface and the Assembly interface like PRO, however, you will also find a XYZ interface. The Import/Export module will also allow .step, .iges, and .dxf files to be imported into the software.

Download link will be provided via email with this purchase. (If you do not receive your download email within 30 minutes, check your spam folder.)

The post Bend-Tech SE (Upgrade from PRO) appeared first on Bend-Tech.